4.02 still has disconnect problem with masso link

[johnharvey]

4.02 still has disconnect problem with masso link



read this was fixed but it has the same behavior, can't reconnect unless I reboot. sometime during the first program run it drops out. WIFI on the controller says it is still connected but masso LINK is still trying to connect.john

 

[cncnutz]

Hi John,

The WiFi issue should indeed be fixed.
Can you confirm if you are connecting via a wireless network or if you are connecting direct using the Make "My MASSO Network" feature direct to your PC.
Can you also let me know what software version you are running eg Mill 3, 4 or 5 axis.

@ron

Have you experienced the same issue as john.
Is so can you confirm if you are connecting via a wireless network or if you are connecting direct using the Make "My MASSO Network" feature direct to your PC.
Can you also let me know what software version you are running eg Mill 3, 4 or 5 axis.

Cheers Peter

 

[johnharvey]

a wireless network. Nothing has changed there. MASSO sees it and it is connected, its the MASSO link that can't connect, same behavior as before. MIll 4.02 and plasma 4 axis but the 4th isn't used or wired right now.



Cheers

john