Can Masso run the drives and servos fitted to my machine

[tsg-tom]

Hi is there a way of getting Masso to run the drives and servos fitted to a machine I'm retro fitting.

I have attached the drives and servo images I hope that helps with the relevant specs.

Any advice is appreciated.

 

[breezy]

@tsg-tom

Tom,

A link to the manuals would be better. Following your other post Large Stone worktop CNC Router retro fit will masso work? To advise on a replacement drive we need to know the electrical specs of the motors and existing drive.

Regards,

Arie.

 

[tsg-tom]

Thank Arie,

Please see below,

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=2ahUKEwiI0_2NwvnoAhUlQUEAHZ1FD5QQFjAAegQIAhAB&url=https%3A%2F%2Fwww.rgbautomatyka.pl%2Fen%2Fp%2Ffile%2Fe2464d2ea345c88832c1f7cf7489969d%2FDM-20%2BBRU-200%2BDRIVE%2BMODULE%2B120240VAC%2B0-400HZ%2BRELIANCE%2BELECTRIC%2BDATASHEET.pdf&usg=AOvVaw0T-QoTkCXpIBr7vFykIxU4

Thank you for your help.



Regards

Tom