Clarification on Parking (new feature in V3.48)

[zombieengineer]

According to the documentation for "G30 - Move to Park Position" it is possible to request the controller to shift the machine to a "Parking" set of co-ordinates by pressing <CTRL>+<ALT>+P.

When I tap "<CTRL>+<ALT>+P" it does not recognize the key combination unless I hold it down for at least 1 second. There is a comment in the documentation that a configured input must be held for at least 1 second, does this also apply to the keyboard combination?

Is this by design?

Also what screens / modes is this function available? (an update of the MASSO cheat sheet is probably required)

 

[breezy]

@zombieengineer

It's a bug, the controller is processing <CTRL> + P first, then it processes <CTRL>+<ALT>+P. If you watch the USB when you issue the command it will flash.

A bug report has been raised.

It available from screens that display MDI (F2 & F3), also on G2 units the command is only available from the MDI and gcode, there is no keyboard or external input.

Regards,

Arie.

 

[breezy]

ZombieEngineer

Bug has been fixed. It will be in the next release, scheduled for later this year.

Regards,

Arie.