cncrouterparts

[dsherburn]

I'll be using a Masso to control a new build, a 4x8 CNCRouterParts HD. Leadshine stepper controller. Does anyone have mechanical/motion info. for their rack and pinion and ball screw (Z)? Inches (or mm) per revolution, etc.

 

[masso-support]

all machines are different and will need different calibration settings, you can also try the calibration wizard to help you with this: https://www.masso.com.au/masso-documentation/?section=axis-calibration-wizard

 

[dsherburn]

I did find this, so it will be helpful. The "Z" axis has a 5mm ball screw so I should be good:

 

[dsherburn]

Here a couple of pictures of the CNCROUTERPARTS 4'x8' machine