Dc 24 volt torch height lifter

[milesice]

• This is a 24volt geared dc motor
  
• Has any one wired one to a masso g3
  
• If so can someone advise
  
• Thanks
  

 

[Ross]

This looks like what he bought.

https://www.aliexpress.com/i/32875661904.html?spm=2114.12057483.0.0.2d302fb3ENC2FI

 

[cncnutz]

Hi milesice

Do you have the manual for the motor driver.
You are only showing the motor which does not connect to MASSO.

You will need to provide all the relevant documentation before anyone can help.

Cheers Peter

 

[milesice]

Quote from CNCnutz on October 26, 2020, 8:57 pm

Hi milesice

Do you have the manual for the motor driver.
You are only showing the motor which does not connect to MASSO.

You will need to provide all the relevant documentation before anyone can help.

Cheers Peter

Hi Peter

I don't have manuel i understand

With a stepper motor you need a microstep driver this one came with no documentation cannot find anywhere

This is a dc brushed motor do I still need

A driver

 

[breezy]

@milesice

Miles,

As Peter said without a manual or at least a wiring diagram there is not much anyone can do for you.

Looking at the link supplied by Ross it seems that the unit is designed to be controlled by a THC, maybe through some relays.

It might be possible to find some sort of S&D driver that will control a DC motor.

So unless you can find information how the unit is supposed to work, there is not much I can do for you.

Regards,

Arie.