Folinn BD600 or Fuling VFD hook up to MASSO

[solargrown]

I need some help hooking up a Folinn BD600 VFD to MASSO.

Hopefully all the required details are in the attached/uploaded PDF and somebody can edit it to show correct connections.

Thanks

Peter

 

[masso-support]

1. Firstly you need to wire Pin: 4 from MASSO to S1.
   
2. Connect Pin: 5 from MASSO to DCM.
   
3. MASSO Pin:1 to AI1
   
4. -ve of MASSO power supply to ACM
   
5. If the motor does not turn then try swapping above Pin 4 and Pin 5
   

 

[solargrown]

THANK YOU
Glad I asked before wiring it up.
That worked, had to swap Pins 4 & 5.

I'm coming across from Mach3, which allows you to set a dwell time for the spindle to reach requested speed before movement.
Is the only way to achieve this with MASSO to make sure gcode has a G04 P** after M03?

 

[masso-support]

thats great.

For the spindle delay, we have added the option already to the new software release that is to be released in the next few days.