G82 G83 not working

[alliant]

Good day. G82 and G83 canned drilling cycles not working properly. Both drill to the Z depth programed without any retract. This programing will work on the Fanuc controls where I work.

N0001
G54
T01M6
G94
G97S1200M03
G00X3.5Y-0.75
Z0.1
G81Z-0.2F3.0
X5.5
Y-2.6
X3.5
G80
G00Z0.1
G28Z0.
M05
M00

N0002
T02M6
G98
G97S1200M03
G00X3.5Y-0.75
Z0.1
G83Z-0.75R0.1Q0125F3.0
X5.5
Y-2.6
X3.5
G80
G00Z0.1
G28Z0.
M05
M00

N0003
T03M6
G17
G97S1200M03
G00X5.0Y-1.675
Z0.1
G01Z-0.05F2.0
G02X4.5Y-2.175I-0.5J0.F3.5
X4.0Y-1.675J0.5
X4.5Y-1.175I0.5J0.
X5.0Y-1.675J-0.5
G01Z0.F5
G00Z0.1
G28Z0.
M05
G18
M30

The program runs everything else just fine. No VFD just the Bridgeport type motor.



Mill control

Core V3.10

Software V3.41 Pre

Maybe I have something wrong in the program. Would not be the first time. Any help would be greatly appreciated.

Thanks Kevin

 

[al]

Try putting a decimal point in the Q term, you have Q0125 try Q0.125

 

[alliant]

Al thanks for the help. I had to put the R value R0.1 in with the Q peck depth Q0.125. Works fine now. Now if we could just get G41 and G42 all would be good.

Kevin