Limit Switch

[bo]

every time i press ctrl + alt home locks z switch i have to turn masso off every time

 

[masso-support]

check the min and max travel values, also make sure that the Z axis moves down when you press D and up when you press U.

 

[bo]

why does it stop when it goes towards z-bryan it does not go back but they do x-bryan must yes restart masso

 

[cncnutz]

Hi Bo,

Have you seen the video below and set up homing as shown.

Please make sure your homing switch changes from low to high when triggered. Make sure your homing speed is not too fast. An axis only backs off 10mm before giving an alarm.

Ensure you are running the latest software version.

Cheers Peter