Lost power on Z axis

D

doc1

Doc
Powered down the Masso for the night, and everything was. Working great. This morning the z axis didn t work.

After checking voltages on all the axis , z has no voltage at the MASSO Controller at all.

i can swap z and y and the z axis moves

im thinking it s internal, any body have any thoughts
 
P

pinoy-cnc

Pinoy CNC
Quote from Doc on January 5, 2019, 11:50 pm

Powered down the Masso for the night, and everything was. Working great. This morning the z axis didn t work.

After checking voltages on all the axis , z has no voltage at the MASSO Controller at all.

i can swap z and y and the z axis moves

im thinking it s internal, any body have any thoughts
Click to expand...

I think I will check also on my controller because we have same problem on my controller, I will check if there is 5v coming out from MASSO going to driver if I jog the Z axis. Only to verified if we have same problem.

X and Y axis moves on jog, z axis no movement at all on jog. But the numbers on z axis in the screen changes if I jog.
 
You must log in or register to reply here.
Top