Pacific lathe conversion

haemish223

haemish223
hi there, I have an old Pacific lathe that I would like to upgrade to have a cnc cross and long control. I have attached some photos of my machine and would appreciate any feedback on how I could retro fit cnc controls to it

cheers H
 

Attachments

  • EB4993E5-A5DB-42CF-9BD1-DC92CBFB32E8.jpeg
    EB4993E5-A5DB-42CF-9BD1-DC92CBFB32E8.jpeg
    3.5 MB · Views: 23
  • BCAFA38D-F3CA-4554-8D40-C5BD6B9C7188.jpeg
    BCAFA38D-F3CA-4554-8D40-C5BD6B9C7188.jpeg
    2.8 MB · Views: 22
  • D24D34A2-DA94-4CFE-8865-8AB3B3BD2639.jpeg
    D24D34A2-DA94-4CFE-8865-8AB3B3BD2639.jpeg
    2.8 MB · Views: 23
  • 2DF173F9-EB95-48FB-8B1B-BC39969DDE18.jpeg
    2DF173F9-EB95-48FB-8B1B-BC39969DDE18.jpeg
    3.3 MB · Views: 26
Top