nootje
Nootje
I have been playing around some time with the controller last days and I notice for example the couuling and spindle does not shut down when the feed hold is pressed.
I realised feed hold is exactly what it says: feed hold. I'm used to have pauze and stop.
Pauze = feedhold
Stop = retract to a safe plane, shut the spindle and coolant modes off.
It would be great if there was an option to have an input that retracts and shut the spindle and coolant off.
I'm still bulding the console that will be used to send commands to the Masso. Before i go crazy with milling too many holes and engravings for the buttons I need to test the unit from A to Z ;-)
I realised feed hold is exactly what it says: feed hold. I'm used to have pauze and stop.
Pauze = feedhold
Stop = retract to a safe plane, shut the spindle and coolant modes off.
It would be great if there was an option to have an input that retracts and shut the spindle and coolant off.
I'm still bulding the console that will be used to send commands to the Masso. Before i go crazy with milling too many holes and engravings for the buttons I need to test the unit from A to Z ;-)
