Question about the text on the side of my spindle
- Thread starter kencnc411
- Start date
Hi @kencnc411
The GDZ-80 is the model number of the spindle. (The 80 almost certainly denotes it has an 80mm diameter)
All you need to worry about is the voltage, current and frequency and use these figures to configure your VFD.
Cheers
Peter
The GDZ-80 is the model number of the spindle. (The 80 almost certainly denotes it has an 80mm diameter)
All you need to worry about is the voltage, current and frequency and use these figures to configure your VFD.
Cheers
Peter