Resistors on THC inputs

5-0coyote

5.0Coyote
Looking for a little help on the resistors for up, down and arc ok inputs. I believe I have them like the drawing but wanting make sure. I have short red wire with one side of 3 resistors soldered to it and the other side of the 3 resistors going one each to each of the 3 inputs does this look correct? I will post some pics

Thanks for all of you guys help on this journey

Curt
 

Attachments

  • 3C03EB7A-D6C7-4AFC-9841-CA0BADC7F29D.jpeg
    3C03EB7A-D6C7-4AFC-9841-CA0BADC7F29D.jpeg
    59.6 KB · Views: 16
  • 08352C3C-07CC-40E9-9A9E-D4A6CED58C5D.jpeg
    08352C3C-07CC-40E9-9A9E-D4A6CED58C5D.jpeg
    61.4 KB · Views: 15
  • 2466135F-7CE9-4A7C-8D60-DB51BB66D0A8.jpeg
    2466135F-7CE9-4A7C-8D60-DB51BB66D0A8.jpeg
    99.2 KB · Views: 19
  • 2CA6E70D-2CB3-4F20-AD0A-8051FE3D6864.jpeg
    2CA6E70D-2CB3-4F20-AD0A-8051FE3D6864.jpeg
    99.2 KB · Views: 15

breezy

Arie
Staff member
Curt,

Correct.

Just connect the joint between the resistor and short wire going to the input to the relevant THC output.

EDIT: Had a closer look at the photos you posted, I missed it the first time around, the wire going off to the THC.

Regards,

Arie.
 
Top