Schneider ATV312 Series VFD

[cncnutz]

​

Caution: Before any VFD can be used it must first be configured correctly to work with your spindle and with MASSO.
Incorrect spindle configuration can lead to damage of the Spindle, the VFD or both.
You must test the VFD and spindle manually before connecting to MASSO and follow the step by step instructions shown in the video on the link below.

Spindle VFD examples

docs.masso.com.au

This diagram is based on the default configuration shown in the VFD documentation.
Please be aware that changes made to configuration and link or switch settings on the main board may make this drawing incorrect.