Supermax YMC 40

[tremeng]

Hi

I have just bought a old ymc40 turret mill with GE Century mark one controller

machine is in perfect condition but controls are stuffed

ive dismantled controls and kept what I thought could be used , servos, servo drives and power supplies

the servos and drives are glentek I have all documentation

is someone able to help with rewireing

 

[evermech]

@tremeng

hi I looked at the photos that you posted in Machine Conversion section of forum and it appears to me that your servos and drivers work on PWM control which could be a problem. I'm not sure if they accept step and direction signals. What is the number on the driver? I will look them up when I get a little spare time. I have a machine that runs on PWM signals and am interested in fitting a Masso control on it so I am interested in the outcome.

regards. Guy

 

[tremeng]

I ve attached two more photos with model numbers I ve downloaded the files for the motors and drives but I don t understand this stuff real well

thanks for any help

 

[tremeng]

Also attached it what masso replied with

 

[breezy]

Quote from tremeng on December 30, 2019, 6:58 am

I ve downloaded the files for the motors and drives but I don t understand this stuff real well

Upload them on your Machine Conversions topic and the members here will look at them and help you solve your wiring problems.

Regards,

Arie.

 

[mochamad]

You can use analog to step dir conversion,from cobra servo,

Pico system,

Or if you can build from scrtch,i have schematic,

 

[tremeng]

Hi could you please post