Two torch height controllers

[johnlittlejack]

Is it possible to have two THCs in the same system. One for the plasma and one for oxy cutting. Will only be using one at a time

 

[masso-support]

there is only one THC option available but you could wire two through a multi-contact switch to select between the two.

 

[pinoy-cnc]

Yes you can used 2 THC, like the one that I did with my CNC propane and plasma machine. You can used stand alone THC for propane and used proma 150 for plasma.

Hope this can help



Rex

 

[johnlittlejack]

We have a torch height controller for plasma and another for the Oxy cutting. They re hypertherm. How did you set yours up?

 

[johnlittlejack]

Quote from Pinoy CNC on October 26, 2019, 8:48 am

Yes you can used 2 THC, like the one that I did with my CNC propane and plasma machine. You can used stand alone THC for propane and used proma 150 for plasma.

Hope this can help



Rex

Hi Pinoy CNC,

how do you write the g code to use one the over the other? or do you use a multi contact switch to switch between them?