VFD Spindle Control Wiring

jcapitao

JCapitao
Hi guys

Can anybody share some light on how i wire my FULING INVERTER DZB312B007.5L2DK to the Masso controller please.

I notice that this VFD is not listed in the Masso PDF Documentation.



Regards

Justin
 

masso-support

MASSO Support
Staff member
can you please share a link to the drive manual and an image of the drive wiring connectors as shown in the manual.
 

jcapitao

JCapitao
I can not seem to find any manual for this VFD. Only info I have are photos attached. Hopefully you can make sense of it.
 

Attachments

  • image.jpeg
    image.jpeg
    1.3 MB · Views: 17

masso-support

MASSO Support
Staff member
you will need the manual to get this thing going because it's not just the wiring but also the parameters that need to be programed to the VFD.
 

jcapitao

JCapitao
Hi @masso-support

The thing is that my VFD parameters are already set, as i have only changed out my steppers to hybrid steppers, and gone from NCStudio to a MASSO controller.



I just need to know where my 4 little wires need to go on your controller.

The current wiring is as such:

Red is bridged between S1 and DCM.

Green is going to S3.

Blue is going to S4.

Green/Yellow is going to S5.



I just noticed that my 3 different photos diverted to the same one every time. I'll fix and re-send.





Cheers.
 

masso-support

MASSO Support
Staff member
As we are getting so many emails to support 3rd party products, its hard for us to support MASSO and do further development, so there has been some changes how we provide support on 3rd party products.


We always try our best to provide the best support to our clients and have been working hard to even provide support for 3rd party products such as motor drive wiring diagrams.


We are always adding more example wiring diagrams in our online documentation, please see these links:


  1. https://www.masso.com.au/docs/masso-cnc-controller-documentation/motors-and-drives-connections/
  2. https://www.masso.com.au/docs/masso-cnc-controller-documentation/spindle-drives/



We always try to providing support for MASSO on priority, trying to support 3rd party products is very resource intensive and delays our support process. To be able to continue with our support for 3rd party products a fee of US$45 (AU$60) will be applicable to design and provide a wiring diagram.


If you would like to continue with this paid service please provide the below details:


  1. Make and exact model of the drive.
  2. A link to the drive user manual.
  3. An email address so that we can email a paypal invoice, once the payment has been processed we will provide a wiring diagram in 3 working days.
 
Top