Wireless working in v3.47.4?

A

ae_mike

AE_Mike
has anyone got wireless working with v3.47.4? I upgraded to v3.47 to test the code in plasma cutting and then updated to v3.47.4 Since doing those updates, I have note been able to connect via wireless and Masso Link to transfer files. My machine runs fine, I just have to use sneaker net to transfer my files. Thought I would ask the community before downgrading the software to v3.44 as I would then have to rework my post processor again to change the minimum radius size to something very small so my table doesn't pause when THC turns on or off.

Thanks,

Michael
 
A

ae_mike

AE_Mike
BTW, I am running the latest Masso Link code, v1.6 Also tried v1.3 with no difference.

I have restarted my pc and wireless modem multiple times. My G2 masso controller does show a blue icon for the wifi which normally means the controller is communicating on the wireless network.
 
A

ae_mike

AE_Mike
Well that was interesting, by the amazing somehow method, the IP address in the Masso Link software changed back to the default value. Changing it back to my selected static IP has made this work once again. Lesson learned on more things to check when this happens in the future. I had already verified that the controller was connected to the router and had a valid IP address, I just over looked the IP field in the Masso Link.

Now back to cutting parts :)
 
You must log in or register to reply here.
Top